China High quality Composite Steel Grating Quotes, Factory, Purchasing, Manufacturers
China High quality Composite Steel Grating Quotes, Factory, Purchasing, Manufacturers

Wuxi Tonghui Grating Co., Ltd

Products

HOME > Products > Steel Grating > Composite Steel Grating

Composite Steel Grating

Brand : tonghui

Product origin : china

Delivery time : 20day

Supply capacity : 100 tons

The composite steel grate is made up of a steel plate with a certain span capacity and a tread plate on the sealing surface. It can be made up of any type of steel grate and various thickness tread steel plates. In this way, we not only take advantage of the characteristics of steel plate skid and no holes, but also make full use of the better carrying capacity of steel grate. Compared with simply using pattern steel plate and section steel, we greatly reduce the use of materials and save cost. By hot dip galvanizing, because heat will produce warping deformation, especially the steel grid plate selection of larger models, leveling difficult, please pay attention to the selection of.

457-201712231857117491.jpg

Composite steel lattice plate is a kind of product consisting of a steel lattice plate with a certain span bearing capacity and a sealing surface.

The composite steel plate by hot dip galvanizing, because heat will produce warping deformation, especially steel lattice panels use larger models, leveling difficult, please pay attention to the selection of.

Composite steel grilles are commonly used in series 3 steel lattices as bottom boards, and series 1 or series 2 steel grid plates can be used. The grid steel plate is commonly used for 3mm thick plates, and 4mm, 5mm and 6mm boards can also be used.

In the front or the bottom surface to defend the steel grid plate connected steel plate made of complex network, can prevent the small drop in the barn, restaurant, warehouse complex board, can prevent mice and other small animal.

Steel Grating Application

1) Galvanized steel grating from the flat width of 65mm-200mm thickness 5mm-20mm, such as welding formed galvanized steel grating for the post-heavy-duty galvanized steel grating suitable for large yard, docks, coal road bridges, etc., can carry large trucks pass.

2) Galvanized steel grating (Bearing Bar Spacing 40mm) spacing of 40mm steel hot dip galvanized steel grating is the most economical and lightweight varieties in the span of a smaller case, is the ideal choice.

3) Galvanized steel grating (Bearing Bar Spacing 60mm) flat steel bar spacing of 60mm to 50mm hot dip galvanized steel grating used in mining mineral mining industry to solve the problem of splash on the plate, often designated for mining processing plant

4) Galvanized steel grating (Bearing Bar Spacing 30mm) spacing of 30mm steel hot dip galvanized steel grating for the industry's most versatile breed in the common hot dip galvanized steel grating series, the impact on the surface the contact force of the strongest

Steel Grating Specification

Steel Grating Standard


Steel Grating Standard

Steel Standard

Galvanizing Standard

China Standard

YB/T 4001.1-2007

GB700-88

GB/T13912-2002

USA Standard

ANSI/NAAMM (MBG531)

ASTM (A36)

ASTM (A123)

U.K. Standard

BS4592

BS4360 (43A)

BS729

Australia Standard

AS1657

AS3679

AS1650

Model Description

1) Bearing Bar Specification: 1", 1-1/4" ,1-1/2" x 1/8", 3/16", 1/4" (Height X Thickness)

2) Bearing Bar Spacing:1/2", 3/4",1",1-1/4",1-1/2"etc, also be according to client' s requirement and 3/8",2" are recommended

3) Bearing Bar Surface:Smooth - Standard surface ; Serrated - Serrations are cut into the grating's bearing bars surface

4) Cross Bar Spacing:1-1/2", 2", 2-1/2", 4" etc, also be according to client's requirement and 2", 4" are recommended

5) Material: Mild Steel or Stainless Steel

Steel Grating Surface Treatment

Untreated

Painting

Hot Dip Galvanizing

Steel Grating Welding

Manual welding

Machine Welding

Steel Grating Precautions

STEEL GRATING1.png

Hole spacing center to center (C to C)


Steel Grating2.png

Hole spacing edge to edge (S to S)

The overall dimension of a flooring panel measured at right angles to the load bearing bars. This dimension is always referred to as "width", even if it exceeds the length. (Standard widths are multiples of Bearing Bar Centres plus Bearing Bar Width).



Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :
    Message